Drawing

With LVGL, you don't need to draw anything manually. Just create objects (like buttons, labels, arc, etc), move and change them, and LVGL will refresh and redraw what is required.

However, it might be useful to have a basic understanding of how drawing happens in LVGL to add customization, make it easier to find bugs or just out of curiosity.

The basic concept is to not draw directly to the screen, but draw to an internal draw buffer first. When drawing (rendering) is ready, that buffer is copied to the screen.

The draw buffer can be smaller than the screen's size. LVGL will simply render in "tiles" that fit into the given draw buffer.

This approach has two main advantages compared to directly drawing to the screen:

  1. It avoids flickering while the layers of the UI are drawn. For example, if LVGL drawn directly into the display, when drawing a background + button + text, each "stage" would be visible for a short time .

  2. It's faster to modify a buffer in internal RAM and finally write one pixel only once than reading/writing the display directly on each pixel access. (e.g. via a display controller with SPI interface).

Note that this concept is different from "traditional" double buffering where there are 2 screen sized frame buffers: one holds the current image to show on the display, and rendering happens to the other (inactive) frame buffer, and they are swapped when the rendering is finished. The main difference is that with LVGL you don't have to store 2 frame buffers (which usually requires external RAM) but only smaller draw buffer(s) that can easily fit into the internal RAM too.

Mechanism of screen refreshing

Be sure to get familiar with the Buffering modes of LVGL first.

LVGL refreshes the screen in the following steps:

  1. Something happens on the UI which requires redrawing. For example, a button is pressed, a chart is changed, an animation happened, etc.

  2. LVGL saves the changed object's old and new area into a buffer, called an Invalid area buffer. For optimization, in some cases, objects are not added to the buffer:

    • Hidden objects are not added.

    • Objects completely out of their parent are not added.

    • Areas partially out of the parent are cropped to the parent's area.

    • The objects on other screens are not added.

  3. In every LV_DISP_DEF_REFR_PERIOD (set in lv_conf.h) the followings happen:

    • LVGL checks the invalid areas and joins the adjacent or intersecting areas.

    • Takes the first joined area, if it's smaller than the draw buffer, then simply render the area's content into the draw buffer. If the area doesn't fit into the buffer, draw as many lines as possible to the draw buffer.

    • When the area is rendered, call flush_cb from the display driver to refresh the display.

    • If the area was larger than the buffer, render the remaining parts too.

    • Do the same with all the joined areas.

When an area is redrawn, the library searches the top most object which covers that area, and starts drawing from that object. For example, if a button's label has changed, the library will see that it's enough to draw the button under the text, and that it's not required to draw the screen under the button too.

The difference between buffering modes regarding the drawing mechanism is the following:

  1. One buffer - LVGL needs to wait for lv_disp_flush_ready() (called from flush_cb) before starting to redraw the next part.

  2. Two buffers - LVGL can immediately draw to the second buffer when the first is sent to flush_cb because the flushing should be done by DMA (or similar hardware) in the background.

  3. Double buffering - flush_cb should only swap the address of the frame buffer.

Masking

Masking is the basic concept of LVGL's draw engine. To use LVGL it's not required to know about the mechanisms described here, but you might find interesting to know how drawing works under hood. Knowing about masking comes in handy if you want to customize drawing.

To learn masking let's learn the steps of drawing first. LVGL performs the following steps to render any shape, image or text. It can be considered as a drawing pipeline.

  1. Prepare the draw descriptors Create a draw descriptor from an object's styles (e.g. lv_draw_rect_dsc_t). This gives us the parameters for drawing, for example the colors, widths, opacity, fonts, radius, etc.

  2. Call the draw function Call the draw function with the draw descriptor and some other parameters (e.g. lv_draw_rect()). It renders the primitive shape to the current draw buffer.

  3. Create masks If the shape is very simple and doesn't require masks go to #5. Else create the required masks (e.g. a rounded rectangle mask)

  4. Calculate all the added mask. It creates 0..255 values into a mask buffer with the "shape" of the created masks. E.g. in case of a "line mask" according to the parameters of the mask, keep one side of the buffer as it is (255 by default) and set the rest to 0 to indicate that this side should be removed.

  5. Blend a color or image During blending masks (make some pixels transparent or opaque), blending modes (additive, subtractive, etc) and opacity are handled.

LVGL has the following built-in mask types which can be calculated and applied real-time:

  • LV_DRAW_MASK_TYPE_LINE Removes a side from a line (top, bottom, left or right). lv_draw_line uses 4 of it. Essentially, every (skew) line is bounded with 4 line masks by forming a rectangle.

  • LV_DRAW_MASK_TYPE_RADIUS Removes the inner or outer parts of a rectangle which can have radius. It's also used to create circles by setting the radius to large value (LV_RADIUS_CIRCLE)

  • LV_DRAW_MASK_TYPE_ANGLE Removes a circle sector. It is used by lv_draw_arc to remove the "empty" sector.

  • LV_DRAW_MASK_TYPE_FADE Create a vertical fade (change opacity)

  • LV_DRAW_MASK_TYPE_MAP The mask is stored in an array and the necessary parts are applied

Masks are used the create almost every basic primitives:

  • letters Create a mask from the letter and draw a rectangle with the letter's color considering the mask.

  • line Created from 4 "line masks", to mask out the left, right, top and bottom part of the line to get perfectly perpendicular line ending.

  • rounded rectangle A mask is created real-time to add radius to the corners.

  • clip corner To clip to overflowing content (usually children) on the rounded corners also a rounded rectangle mask is applied.

  • rectangle border Same as a rounded rectangle, but inner part is masked out too.

  • arc drawing A circle border is drawn, but an arc mask is applied too.

  • ARGB images The alpha channel is separated into a mask and the image is drawn as a normal RGB image.

Hook drawing

Although widgets can be very well customized by styles there might be cases when something really custom is required. To ensure a great level of flexibility LVGL sends a lot events during drawing with parameters that tell what LVGL is about to draw. Some fields of these parameters can be modified to draw something else or any custom drawing can be added manually.

A good use case for it is the Button matrix widget. By default its buttons can be styled in different states but you can't style the buttons one by one. However, an event is sent for every button and you can for example tell LVGL to use different colors on a specific button or to manually draw an image on some buttons.

Below each of these events are described in detail.

Main drawing

These events are related to the actual drawing of the object. E.g. drawing of buttons, texts, etc happens here.

lv_event_get_clip_area(event) can be used to get the current clip area. The clip area is required in draw functions to make them draw only on a limited area.

LV_EVENT_DRAW_MAIN_BEGIN

Sent before starting to draw an object. This is a good place to add masks manually. E.g. add a line mask that "removes" the right side of an object.

LV_EVENT_DRAW_MAIN

The actual drawing of the object happens in this event. E.g. a rectangle for a button is drawn here. First, the widgets' internal events are called to perform drawing and after that you can draw anything on top of them. For example you can add a custom text or an image.

LV_EVENT_DRAW_MAIN_END

Called when the main drawing is finished. You can draw anything here as well and it's also good place to remove the masks created in LV_EVENT_DRAW_MAIN_BEGIN.

Post drawing

Post drawing events are called when all the children of an object are drawn. For example LVGL use the post drawing phase to draw the scrollbars because they should be above all the children.

lv_event_get_clip_area(event) can be used to get the current clip area.

LV_EVENT_DRAW_POST_BEGIN

Sent before starting the post draw phase. Masks can be added here too to mask out the post drawn content.

LV_EVENT_DRAW_POST

The actual drawing should happen here.

LV_EVENT_DRAW_POST_END

Called when post drawing has finished. If the masks were not removed in LV_EVENT_DRAW_MAIN_END they should be removed here.

Part drawing

When LVGL draws a part of an object (e.g. a slider's indicator, a table's cell or a button matrix's button) it sends events before and after drawing that part with some context of the drawing. It allows changing the parts on a very low level with masks, extra drawing, or changing the parameters that LVGL is planning to use for drawing.

In these events an lv_obj_draw_part_t structure is used to describe the context of the drawing. Not all fields are set for every part and widget. To see which fields are set for a widget see the widget's documentation.

lv_obj_draw_part_t has the following fields:

// Always set
const lv_area_t * clip_area;        // The current clip area, required if you need to draw something in the event
uint32_t part;                      // The current part for which the event is sent
uint32_t id;                        // The index of the part. E.g. a button's index on button matrix or table cell index.

// Draw desciptors, set only if related
lv_draw_rect_dsc_t * rect_dsc;      // A draw descriptor that can be modified to changed what LVGL will draw. Set only for rectangle-like parts
lv_draw_label_dsc_t * label_dsc;    // A draw descriptor that can be modified to changed what LVGL will draw. Set only for text-like parts
lv_draw_line_dsc_t * line_dsc;      // A draw descriptor that can be modified to changed what LVGL will draw. Set only for line-like parts
lv_draw_img_dsc_t *  img_dsc;       // A draw descriptor that can be modified to changed what LVGL will draw. Set only for image-like parts
lv_draw_arc_dsc_t *  arc_dsc;       // A draw descriptor that can be modified to changed what LVGL will draw. Set only for arc-like parts

// Other paramters 
lv_area_t * draw_area;              // The area of the part being drawn
const lv_point_t * p1;              // A point calculated during drawing. E.g. a point of chart or the center of an arc.
const lv_point_t * p2;              // A point calculated during drawing. E.g. a point of chart.
char text[16];                      // A text calculated during drawing. Can be modified. E.g. tick labels on a chart axis.
lv_coord_t radius;                  // E.g. the radius of an arc (not the corner radius).
int32_t value;                      // A value calculated during drawing. E.g. Chart's tick line value.
const void * sub_part_ptr;          // A pointer the identifies something in the part. E.g. chart series. 

lv_event_get_draw_part_dsc(event) can be used to get a pointer to lv_obj_draw_part_t.

LV_EVENT_DRAW_PART_BEGIN

Start the drawing of a part. This is a good place to modify the draw descriptors (e.g. rect_dsc), or add masks.

LV_EVENT_DRAW_PART_END

Finish the drawing of a part. This is a good place to draw extra content on the part, or remove the masks added in LV_EVENT_DRAW_PART_BEGIN.

Others

LV_EVENT_COVER_CHECK

This event is used to check whether an object fully covers an area or not.

lv_event_get_cover_area(event) returns an pointer to an area to check and lv_event_set_cover_res(event, res) can be used to set one of these results:

  • LV_COVER_RES_COVER the areas is fully covered by the object

  • LV_COVER_RES_NOT_COVER the areas is not covered by the object

  • LV_COVER_RES_MASKED there is a mask on the object so it can not cover the area

Here are some reasons why an object would be unable to fully cover an area:

  • It's simply not fully in area

  • It has a radius

  • It has not 100% background opacity

  • It's an ARGB or chroma keyed image

  • It does not have normal blending mode. In this case LVGL needs to know the colors under the object to do the blending properly

  • It's a text, etc

In short if for any reason the area below the object is visible than it doesn't cover that area.

Before sending this event LVGL checks if at least the widget's coordinates fully cover the area or not. If not the event is not called.

You need to check only the drawing you have added. The existing properties known by widget are handled in the widget's internal events. E.g. if a widget has > 0 radius it might not cover an area but you need to handle radius only if you will modify it and the widget can't know about it.

LV_EVENT_REFR_EXT_DRAW_SIZE

If you need to draw outside of a widget LVGL needs to know about it to provide the extra space for drawing. Let's say you create an event the writes the current value of a slider above its knob. In this case LVGL needs to know that the slider's draw area should be larger with the size required for the text.

You can simple set the required draw area with lv_event_set_ext_draw_size(e, size).