Objects

In LVGL the basic building blocks of a user interface are the objects, also called Widgets. For example a Button, Label, Image, List, Chart or Text area.

You can see all the Object types here.

All objects are referenced using an lv_obj_t pointer as a handle. This pointer can later be used to set or get the attributes of the object.

Attributes

Basic attributes

All object types share some basic attributes:

  • Position

  • Size

  • Parent

  • Styles

  • Event handlers

  • Etc

You can set/get these attributes with lv_obj_set_... and lv_obj_get_... functions. For example:

/*Set basic object attributes*/
lv_obj_set_size(btn1, 100, 50);	  /*Set a button's size*/
lv_obj_set_pos(btn1, 20,30);      /*Set a button's position*/

To see all the available functions visit the Base object's documentation.

Specific attributes

The object types have special attributes too. For example, a slider has

  • Minimum and maximum values

  • Current value

For these special attributes, every object type may have unique API functions. For example for a slider:

/*Set slider specific attributes*/
lv_slider_set_range(slider1, 0, 100);	   				/*Set the min. and max. values*/
lv_slider_set_value(slider1, 40, LV_ANIM_ON);		/*Set the current value (position)*/

The API of the widgets is described in their Documentation but you can also check the respective header files (e.g. widgets/lv_slider.h)

Working mechanisms

Parent-child structure

A parent object can be considered as the container of its children. Every object has exactly one parent object (except screens), but a parent can have any number of children. There is no limitation for the type of the parent but, there are typical parent (e.g. button) and typical child (e.g. label) objects.

Moving together

If the position of the parent changes the children will move with the parent. Therefore all positions are relative to the parent.

../_images/par_child1.png

lv_obj_t * parent = lv_obj_create(lv_scr_act());   /*Create a parent object on the current screen*/
lv_obj_set_size(parent, 100, 80);	                 /*Set the size of the parent*/

lv_obj_t * obj1 = lv_obj_create(parent);	         /*Create an object on the previously created parent object*/
lv_obj_set_pos(obj1, 10, 10);	                     /*Set the position of the new object*/

Modify the position of the parent:

../_images/par_child2.png

lv_obj_set_pos(parent, 50, 50);	/*Move the parent. The child will move with it.*/

(For simplicity the adjusting of colors of the objects is not shown in the example.)

Visibility only on the parent

If a child is partially or fully out of its parent then the parts outside will not be visible.

../_images/par_child3.png

lv_obj_set_x(obj1, -30);	/*Move the child a little bit off the parent*/

Create and delete objects

In LVGL objects can be created and deleted dynamically in run time. It means only the currently created (existing) objects consume RAM.

This allows for the creation of a screen just when a button is clicked to open it, and for deletion of screens when a new screen is loaded.

UIs can be created based on the current environment of the device. For example one can create meters, charts, bars and sliders based on the currently attached sensors.

Every widget has its own create function with a prototype like this:

lv_obj_t * lv_<widget>_create(lv_obj_t * parent, <other paramaters if any>);

In most of the cases the create functions have only a parent parameter that tells on which object create the new widget.

The return value is a pointer to the created object with lv_obj_t * type.

There is a common delete function for all object types. It deletes the object and all of its children.

void lv_obj_del(lv_obj_t * obj);

lv_obj_del will delete the object immediately. If for any reason you can't delete the object immediately you can use lv_obj_del_async(obj) that will perform the deletion on the next call of lv_timer_handler(). This is useful e.g. if you want to delete the parent of an object in the child's LV_EVENT_DELETE handler.

You can remove all the children of an object (but not the object itself) using lv_obj_clean(obj).

Screens

Create screens

The screens are special objects which have no parent object. So they can be created like:

lv_obj_t * scr1 = lv_obj_create(NULL);

Screens can be created with any object type. For example, a Base object or an image to make a wallpaper.

Get the active screen

There is always an active screen on each display. By default, the library creates and loads a "Base object" as a screen for each display.

To get the currently active screen use the lv_scr_act() function.

Load screens

To load a new screen, use lv_scr_load(scr1).

Layers

There are two automatically generated layers:

  • top layer

  • system layer

They are independent of the screens and they will be shown on every screen. The top layer is above every object on the screen and the system layer is above the top layer too. You can add any pop-up windows to the top layer freely. But, the system layer is restricted to system-level things (e.g. mouse cursor will be placed here in lv_indev_set_cursor()).

The lv_layer_top() and lv_layer_sys() functions return pointers to the top and system layers respectively.

Read the Layer overview section to learn more about layers.

Load screen with animation

A new screen can be loaded with animation too using lv_scr_load_anim(scr, transition_type, time, delay, auto_del). The following transition types exist:

  • LV_SCR_LOAD_ANIM_NONE: switch immediately after delay milliseconds

  • LV_SCR_LOAD_ANIM_OVER_LEFT/RIGHT/TOP/BOTTOM move the new screen over the current towards the given direction

  • LV_SCR_LOAD_ANIM_MOVE_LEFT/RIGHT/TOP/BOTTOM move both the current and new screens towards the given direction

  • LV_SCR_LOAD_ANIM_FADE_ON fade the new screen over the old screen

Setting auto_del to true will automatically delete the old screen when the animation is finished.

The new screen will become active (returned by lv_scr_act()) when the animations starts after delay time.

Handling multiple displays

Screens are created on the currently selected default display. The default display is the last registered display with lv_disp_drv_register or you can explicitly select a new default display using lv_disp_set_default(disp).

lv_scr_act(), lv_scr_load() and lv_scr_load_anim() operate on the default screen.

Visit Multi-display support to learn more.

Parts

The widgets are built from multiple parts. For example a Base object uses the main and scrollbar parts but a Slider uses the main, the indicator and the knob parts. Parts are similar to pseudo elements in CSS.

The following predefined parts exist in LVGL:

  • LV_PART_MAIN A background like rectangle*/``

  • LV_PART_SCROLLBAR The scrollbar(s)

  • LV_PART_INDICATOR Indicator, e.g. for slider, bar, switch, or the tick box of the checkbox

  • LV_PART_KNOB Like a handle to grab to adjust the value*/

  • LV_PART_SELECTED Indicate the currently selected option or section

  • LV_PART_ITEMS Used if the widget has multiple similar elements (e.g. tabel cells)*/

  • LV_PART_TICKS Ticks on scales e.g. for a chart or meter

  • LV_PART_CURSOR Mark a specific place e.g. text area's or chart's cursor

  • LV_PART_CUSTOM_FIRST Custom parts can be added from here.

The main purpose of parts to allow styling the "components" of the widgets. Therefore the parts are described in more detail in the Style overview section.

States

The object can be in a combination of the following states:

  • LV_STATE_DEFAULT Normal, released state

  • LV_STATE_CHECKED Toggled or checked state

  • LV_STATE_FOCUSED Focused via keypad or encoder or clicked via touchpad/mouse

  • LV_STATE_FOCUS_KEY Focused via keypad or encoder but not via touchpad/mouse

  • LV_STATE_EDITED Edit by an encoder

  • LV_STATE_HOVERED Hovered by mouse (not supported now)

  • LV_STATE_PRESSED Being pressed

  • LV_STATE_SCROLLED Being scrolled

  • LV_STATE_DISABLED Disabled state

  • LV_STATE_USER_1 Custom state

  • LV_STATE_USER_2 Custom state

  • LV_STATE_USER_3 Custom state

  • LV_STATE_USER_4 Custom state

The states are usually automatically changed by the library as the user presses, releases, focuses etc an object. However, the states can be changed manually too. To set or clear given state (but leave the other states untouched) use lv_obj_add/clear_state(obj, LV_STATE_...) In both cases ORed state values can be used as well. E.g. lv_obj_add_state(obj, part, LV_STATE_PRESSED | LV_PRESSED_CHECKED).

To learn more about the states read the related section of the Style overview.